| Product Index |
| CENTRIFUGAL PUMP |
|
| SUBMERSIBLE PUMP |
|
| COOLING PUMP |
|
| CONDENSATE PUMP |
|
| FUEL TRANSFER PUMP |
|
| GUNS |
|
| OTHER |
|
| NEW PRODUCTS |
|
|
|
| |
 X1000 Extra Low Level Piggyback Diaphragm Switch
with 5.5m Power Cord and Power Socket
The remote switch X1000 for submersible pumps can be used either by attaching it to Little Giant 5-MSP pump or used separately with other pumps to control on-off operation of the pump. The switch is activated by pressure to a diaphragm which activates a switch providing power to the pump.
Specifications
Type: Diaphragm
Max. Amps Running: 10A
Voltage: 115V/230V PVC Cord
Length: 5.5m Connect Cord & 0.25m Power Cable Max.
Temperature: 50℃ Float and Socket Cover
Material: PP+Fiberglass
Dimensions: Switch 148x86x42mm, Socket 130x55x52mm
Features
- Converts any manual pump to automatic operation, up through 1/3 HP
- Easy Installation, with Quick Piggy-Back Plugs and Power Socket
- When the water drops too low, the switch turns the pump off; when the water level comes back up the switch turns the pump back on
- Match with Little Giant 5-MSP，start level 5cm-7.6cm，off level 1.27cm-3.8cm
Installation
- For installation on the Little Giant 5-MSP, 6-CIM-R or 6-CBM-R pumps
- For installation on M-100, HOME, CSS-250, 50PS pumps
- For universal installation, *** can be attached to a pipe with the cable ties provided
- Automatic power cord contains a breather tube. Be sure power cord is not pinched so that breather tube is obstructed. Non-restrictive air flow in breather tube is required for proper operation
- Test the pump after all electrical connections have been made. Do not attempt to run the pump without water; this could result in permanent damage to the pump
Includes: (1) Pump Cut-Off Switch, (2) Mountain Screws, (2) Cable Ties
 |
| |
|
